Operation Manual

Safety Information

Some Do’s And Don’ts For the Safe Use Of Equipment

This equipment has been designed and manufactured to meet international safety standards

but, like any electrical equipment, care must be taken if you are to obtain the best results and

safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the main plug, extension leads and inter-

connections between the pieces of equipment) are properly made and in accordance with the

manufacturer’s instructions. Switch off and withdraw the main plug before making or changing

connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your

equipment.

DON’T remove any fixed cover as this may expose dangerous voltages.

Overheating will cause damage and shorten the life of the equipment.

DON’T allow electrical equipment to be exposed to dripping or splashing, or objects filled with

liquids, such as vases, to be placed on the equipment.

DON’T place hot objects or naked flame sources such as lighted candles or nightlights on or

close to equipment. High temperatures can melt plastic and lead to fires.

DON’T use equipment such as personal stereos or radios so that you are distracted from the

requirements of traffic safety.

DON’T listen to headphones at high volume, as such use can permanently damage your

hearing.

DON’T leave equipment switched on when it is unattended unless it is specifically stated that it

is designed for unattended operation. Switch off using the switch on the equipment and make

sure that your family knows how to do this. Special arrangements may need to be made for

infirmed or handicapped people.

DON’T continue to operate the equipment if you are in any doubt about whether it’s working

normally or if it’s damaged in any way. Switch it off and withdraw the main plug and consult your

dealer.

ESD Remark: In case of malfunction due to electrostatic discharge just reset the product

(reconnection of power source may be required) to resume normal operation.

NOTE: In the unlikely event of a problem with your product please return to the store where you

purchased it.