Operation Manual

8
DAB+, DAB MODE
How to Get Start?
 Note: Place your radio on a suitable shelf or a flat table, and then connect the power adapter
between your radio and the mains supply.
1. Extend the antenna found on the back of radio. Press STANDBY/ON to switch it on.
2. For initial use, your radio will make a full scan and store every station it can be detected in
its memory.
 Note: In use, your radio may automatically run to your last listening mode while turn it on.
3. Once the scanning is finished, the DAB+/DAB stations will be displayed in alphanumeric
order. The first station in the list would be selected.
4. If no station detected, please follow 2 steps: Firstly, please place your radio on stronger
signal position. Secondly, press SCAN.
5. Want to shift to another program, waiting until the scanning is completed or while playing
a DAB+/DAB program, turn the SELECT knob to view stations list, and then press this
knob to confirm your preferred program.
How to Update Station List?
 Note: to do this, placing your radio in a stronger signal position is highly recommended!
 Simply press SCAN to complete this order, or follow below two steps:
1. Press MENU, while cursor point to < full scan >.
2. Press the SELECT knob to confirm.
Wait a minute. The radio will scan all the DAB/DAB+ channels and add any new stations
available to the station list.