Use and Care Manual

2 For more information, visit global.irobot.com
EN
Download the iRobot Home App and Connect to Wi-Fi®
• Follow step-by-step instructions to set up your Roomba Combo™.
• Set up PrecisionVision Navigation to avoid obstacles in real time.
• Set an automatic cleaning schedule and customize cleaning preferences.
• Create smart maps to tell your robot where, when and how to clean.
Charging
CLEAN
• Place the robot on the charging station to activate the battery.
• The robot uses a small amount of power whenever it is on the charging
station. You can put the robot in a further-reduced power state when not in
use. For instructions and more details on this Reduced Power Standby Mode,
refer to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from the charging
station and holding down the clean button for 3 seconds with one wheel off
the ground. Store the robot in a cool, dry place.
Light Ring Spiral While Charging
White Spiral: charging
A solid white light will indicate the battery
charge percentage of your robot
Note: Your robot comes with a partial charge, but we recommend that you charge
the robot for 3 hours prior to starting the first cleaning job.
When your robot is fully charged, the
light ring indicator will intermittently
pulse white at the rear.
Using Your Roomba Combo™ Robot Vacuum & Mop
Positioning the Home Base™ Charging Station
Good Wi-Fi® Coverage
*Objects are not to scale.
4 ft (1.2 m)
from stairs
4 ft (1.2 m)
in front
1.5 ft (0.5 m)
both sides
Note: Do not place
your Home Base™
in direct sunlight.
Ensure the area
around the dock
is free of clutter to
improve docking
performance.
WARNING: To
prevent the risk of
your robot falling
downstairs, ensure
that the charging
station is placed
at least 4 feet (1.2
meters) away from
stairs.