HP Air Mover Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ironton™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This 1 HP Air Mover is designed for certain applications only.
Table of Contents Intended Use .......................................................................................................................................... 4 Technical Specifications ...................................................................................................................... 4 Important Safety Information ............................................................................................................... 4 Specific Operating Warnings .......................
Intended Use Ironton’s #52721 1 HP Air Mover is intended to move air to dry floors, walls, furniture, and other areas. It’s durable and easy to operate with an effective balance of static pressure and airflow making it suitable for a variety of applications. Technical Specifications Model Volt / Frequency Power Amp Rated Airflow (on High) RPM (Low/Medium/High) Available Speeds #52721 115 Volts / 60 Hz 1 HP 8.
ignite the flammable liquids, gases, or dust. • Do not allow the air mover to come into contact with an electrical source. The air mover is not insulated and contact will cause electrical shock. • Keep children and bystanders away from the work area while operating the air mover. Do not allow children to handle the air mover. • Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your work area.
⚠CAUTION AIR MOVER USE AND CARE • Do not force the air mover. Products are safer and do a better job when used in the manner for which they are designed. Plan your work and use the correct product for the job. • Check for damaged parts before each use. Carefully check that the air mover will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the air mover with a damaged part. • Do not use an air mover with a malfunctioning switch.
Grounding ⚠WARNING • This machine must be grounded while in use to protect the operator from electrical shock. The plug MUST be plugged into a matching receptacle that is properly installed and grounded in accordance with ALL local codes and ordinances. • DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
Assembly Instructions Ironton’s 1 HP Air Mover is shipped ready-to-use. Before plugging the unit into the power source, completely inspect it for any shipping damage. Before Each Use ⚠WARNING Always inspect power cords for damage before operating. Operating Instructions 1. Plug the electrical cord into the power outlet. To reduce the risk of electric shock, connect only to an outlet provided with a Ground Fault Circuit Interrupter device. 2. Carefully place the air mover on a stable, flat, dry surface. 3.
Maintain the air mover by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures. It is recommended that the general condition of any tool be examined before it is used. Keep your air mover in good repair. Troubleshooting Use the table below to troubleshoot problems before contacting service personnel or your local dealer. If the problem continues after troubleshooting, call your local dealer for assistance. Failure Air mover not running.
Parts List Reference Number 1 2 3 4 5 6 7 8 9 10 11 12 13 Part Name Grid Cover (Motor Side) Left Housing Switch Knob Switch Panel Switch Motor Power Cord Right Housing Fan Grid Cover (Fan Side) Air Outlet Grid Cover Kick Stand Capacitor Replacement Parts • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381. • Not all product components are available for replacement.
Limited Warranty Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only ("You'' or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions.
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.
