Product Manual

CAUTION
AIR MOVER USE AND CARE
Do not force the air mover. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the air mover will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
air mover with a damaged part.
Do not use an air mover with a malfunctioning switch. Any power tool that cannot be controlled
with the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power/air supply from the air mover and place the switch in the lockedor off
position before making any adjustments, changing accessories, or storing the air mover. Such
preventive safety measures reduce the risk of starting the air mover accidentally.
Store the air mover when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the air mover for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your air mover.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the air mover itself.
Specific Operating Warnings
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
Electric shock hazard. DO NOT expose to water.
Risk of electric shock. Connect to a properly grounded outlet equipped with a ground fault circuit
interruption device (GFCI).
DO NOT use the unit with any Solid-State Speed Control Device.
Risk of fire. DO NOT operate in areas with flammable fumes. Sparks from air mover may ignite
fumes.
DO NOT run the cord under carpeting. DO NOT cover the cord with throw rugs, runners, or
similar coverings.
DO NOT route the cord under furniture or appliances. Arrange the cord away from traffic areas
where it will not be tripped over.
DO NOT use an extension cord.
Disconnect from the power supply before servicing.
DO NOT block the air inlet or exhaust.
DO NOT modify the grounded plug.
DO NOT use if the cord or other parts are damaged.
Page 6 of 12