SMART DISCHARGER FD-100 80W GE.
Ejtdmbjnfs!boe!Xbsojoh Thank you for using the product from SHENZHEN ISD TECHNOLOGY CO.,LTD This product is specifically designed for RC, not appliance in other areas. We strongly recommend you read our user’ s guide before using FD-100. ISDT accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. ISDT reserves the right to update the design, appearance, function and usage requirement without notifying. 10.
Qspevdu!Jogp Max Discharging Power 80W Min input voltage 6V Max input voltage 35V Support battery cells 2-8S Support battery type LiPo, LiHv, LiFe, LiIon Self power off protection support Wrong voltage alarm support Wrong cell setting alarm support Beeper 80dB Weight 295g Gvodujpo!Cvuupo 2/!Dfmmt!tfmfdujpo!cvuupo! 4 3 3/!Dvssfou!tfmfdujpo!cvuupo! 4/!Xpsljoh!tubuvt!mjhiu 2 1 67NN 5/!Cbuufsz!joqvu!qpsu 6 6/!QD!qpsu 5 7/!Cffqfs 231NN 54NN
Pqfsbujpo!Hvjef! 1.Plug in battery, select cells button 2.Make sure selected number of cells is correct ( For wrong number of cell selection, red light will blink, beeper alarm for 60 second, then auto power off ) 3.After 5 second, FD100 would start working, green light will blink. 4.When battery voltage reaches cut off voltage, green light will be always on, beeper alarm for 60s, then auto power off. ( Default discharging voltage is 3.
QD!Pqfsbujpo!Hvjef! JTEU!tdMjolfs B!Ejtdibshf!dvu.pgg!wpmubhf!tfuujoh; 1,Connect the FD-100 and PC with a scLinker 2,Please make sure the battery is within allowed range first,then choose the series to get the FD-100 start work. 3,Use the “FD-100 linker.exe” to set the storage voltage(3.3V-4.0V/cell).When the background color turns green,the setting was successful.
QD!Pqfsbujpo!Hvjef! JTEU!tdMjolfs C!GE.211!wpmubhf!dbmjcsbujpo!; 1,Connect the FD-100 and PC with a scLinker 2,Please make sure the battery is within allowed range first,then measure the battery’s real voltage and take a note. 3,Use the “FD-100 linker.exe” to fill in the real voltage(measured on step 1),and then click “Calibration(F8)” botton.When the background color turns green,the caliration was successful. * You could use ISDT BG-8S/BC-8S/Smart Charge to measure the battery’s real voltage.
XXX/JTEU/DP Shenzhen ISD Technology CO.,LTD Address:!5th Fl., Bldg. 9, Mabian Industrial Zone, Yangtian Rd., Block 72, Xin'An Street,Bao'An District, Shenzhen, PRC Changes in specifications and data will not be further noticed. Email:hi@isdt.
