Instructions

Pqfsbujpo!Hvjef!
Tbgfuz!Qsfdbvujpot;
1.Plug in battery, select cells button
2.Make sure selected number of cells is correct
( For wrong number of cell selection, red light will blink, beeper
alarm for 60 second, then auto power off )
3.After 5 second, FD100 would start working, green light will blink.
4.When battery voltage reaches cut off voltage, green light will be always
on, beeper alarm for 60s, then auto power off.
( Default discharging voltage is 3.80v /cell, voltage could be modi-
fied through PC software, ISDT Q6 pro, T8 smart charger. Adjust-
able range 3.3v-4.0v/cell )
Before connecting battery, make sure your battery
voltage is within working voltage of FD100.
During operation, make sure number of cells is correct
FIRE HAZARD!WARNING!
Failure to observe safety procedures may cause damages to property or injury.
Only operate this product in a cool ventilated area away from flammable objects.
This unit will generate a lot of heat during usage, make sure air is floating,
avoid any physical contact to the metal part of this unit during usage.