Instructions / Assembly

SHADE SAIL
INSTALLATION INSTRUCTION
Prior to installation, check with local authorities for any relevant building regulations which
may exist, and check with the local utility companies for any underground services prior to
digging holes for the support posts.
Selecting The Position
Before you commence installation it is very important that you consider the most suitable
location for your shade sails taking into account the following:
Size of the shade sails;
Strength of existing structures intended to be anchor points;
Ability to insert fixed posts;
Location of barbecues;
Sun direction, etc.
Typical wind speeds and maximum ex
pected for your area;
There could also be other factors, specific to your situation, which require consideration.
Possible Sail Construction
High
High
Low
Low
High
High
Low
Low
Selecting Anchor Accessories
Select the anchor accessories which best suit your own installation. NOTE: NOT ALL anchor
accessories shown are included, but are available at your local hardware store/home center.
Chain, wire, or thick, strong non-stretching rope can be used to extend shade sail
corner to a fixing point several inches or many feet away, if needed.
Spring Clip Connector
Turnbuckle Shade
Sail Connector
Chain Extensions
WIRE ROPE GRIP
ANCHORS
Eye Lag Screw
Pad Eye
Eye Bolt with Nut
LINKS
Turnbuckle
Snap Hoop
D-Shackle
S-Hook
EXTENSIONS
Chain
Cable Assembly
STEEL CABLE
THIMBLE
NU6803 • NU6804 • NU6805 • NU6806 • NU6807 • NU6808
1.5M Rope, NUP4095 Pad Eye, NUP4096 Snap Hook, NUP4097 Turnbuckle, NUP4098
Parts List

Summary of content (2 pages)