Manual

Quality Controls - 5

Page 22 14439.C 03/2013VerifyNow System User Manual | USA

7. Openthecover.Usingthengergrip,insertthetestdeviceintothetestdeviceportuntilitclicks

(Figure 5-9).

Barcode

Scanner

Figure 5‑9 Insert Device

8. If the test deviceistherstfromanewlot,theinstrumentwilldisplayabarcodescreenassoonas

the test device is inserted into the port and the device spot code is read. (Figure 5-10). Position the

barcode of the test device pouch in front of the bar code scanner on the left side of the instrument

so that the bar code on the bottom edge of the pouch lines up with the scanner window. Move the

pouch both towards and away from the red barcode light. An audible beep will be heard when the

instrument reads the information. Press the Retry key if you are unable to scan the bar code the

rsttime.

Figure 5‑10 Scan Bar Code

Bar Code

WQC P2Y12

Use bar code

scanner to read

the bar code.

26-Feb-2012

14:57:00

After the bar code has been scanned once, the instrument will accept all remaining test devices from

that lot without displaying the bar code screen.

NOTE:Ifyouareexperiencingdifcultywiththebarcodescanner scanning the label, try adjusting the angle of the scan by

raising the corner of the instrument.

9. Gently invert the diluent tubevetimestomixthereagents immediately before use (Figure 5-11).

Figure 5‑11 Invert Tube