Use and Care Manual

ManualsBrandsIvation ManualsElectric Heaters1500-Watt 6-Element Electric Infrared Quartz Mini Heater with Digital Thermostat, Remote Control

6-element Infrared Quartz Mini Heater

User Guide

IVAIFWM1500

Thank you for purchasing the Ivation Ivation 6-element Infrared Quartz Mini Heater. This User Guide is

intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk

to the user. Any use that does not conform to the guidelines described in this User Guide may void the

limited warranty.

Please read all the directions before using the product and retain this guide for reference. This product is

intended for household use only.

This product is covered by a limited one year warranty. Coverage is subject to limits and exclusions. See

warranty for details.

With six efficient quartz heating elements, the compact yet powerful Ivation mini heater brings the right

amount of warmth exactly where you need it. Featuring tip-over and overheat protection, plus a child lock

button, this economical space heater is ideal for use around children and pets.

Package Contents:

6-element Infrared Quartz Mini Heater

Remote control unit

User guide

Summary of content (10 pages)

PAGE 1
6-element Infrared Quartz Mini Heater User Guide IVAIFWM1500 Thank you for purchasing the Ivation Ivation 6-element Infrared Quartz Mini Heater. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all the directions before using the product and retain this guide for reference.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS • • • • • • • • • • • • • • • • • • • • • • • POTENTIAL ELECTRICAL HAZARD. When using electrical appliances like this heater basic precautions should always be followed in order to reduce the risk of fire, electrical shock, and injury. The precautions include: Heater must be plugged into a 120 volt, 15 amp (or more) outlet. Do not plug anything else into the same outlet. Consult a certified electrician to confirm if your home meets this specification prior to use.
PAGE 3
Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. If the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To start the heater once it’s reset, push the power button on the remote control or heater’s control panel. Overheat Safety Feature This heater is equipped with an overheat safety feature.
PAGE 4
Preparation: • Place the heater on a firm, level surface and plug into a grounded 120V, 60Hz power outlet. • Only operate heater when it is in an upright position. • Insert two AAA batteries into the remote control before using. Batteries are not included. Please note that infrared heaters do not heat or blow hot air like a traditional space heater. Infrared heaters are intended to supplement an already-heated, insulated room. Square footage specifications assume a single enclosed room, not an entire home.
PAGE 5
Remote Control: 1 Temp Up Button Increases the set temperature value 2 Mode Button Toggles between the three heat modes available 3 Temp Down Button Decreases the set temperature value 4 Power Button Powers the heater on or off 5 Ambient/Lock Button Short press: Shows Ambient temperature. Long press for 3 seconds to activate lock function. 6 Timer Button Engages the on/off timer 1 6 2 3 4 5 Operating Instructions: 1.
PAGE 6
3. Set the heater’s thermostat by pressing the arrows on the control panel (Figure C) or the TEMP UP or TEMP DOWN buttons on the remote control (Figure B). 3 C You can set the temperature anywhere between 50°F and 90°F (10°C and 32°C). Once you have chosen the desired temperature, the heater will remain on until the room temperature increases to the temperature on the heater’s digital display. The heater will cycle on and off to maintain the desired room temperature.
PAGE 7
6. To add or replace the batteries in the remote control (Figure B), remove the battery cover (1) by pushing down on the arrow on the top and sliding it away from the remote. Insert two AAA batteries (not included) into compartment (2) and slide the remote cover back on. 6 1 2 B Note: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (NiCad, Ni-MH, etc.) batteries.
PAGE 8
Frequently Asked Questions Q. My heater emits a strange odor when I first open the box, and when I turn it on for the first time. Why is this happening? A. This is normal. The heater is treated with a special heat safe/resistant coating. This odor can be present when the box is opened. When the coating is exposed to heat during the first few hours of operation there will be an odor. This odor will dissipate after the break-in period.
PAGE 9
WARNING: Risk of fire, damage to property, or injury may result if requirements are not met. Q. Why does my heater’s fan continue to run after the set temperature is reached or the power has been turned off? A. This is normal. The fan will continue to run even after the heater automatically cycles down. The fan continues to run so that every last bit of heat is blown out of the heater chamber, while allowing the heater to continue to filter your air.
PAGE 10
Replacement Parts List Part Description Part # A Control panel COPA-H2016 B Fan FAN3018 C Power board POBO-H2016 D Tip-over switch TIPSW E Limit switch LIMITSW130 F Infrared tube QUAR-R250 G Thermostat Wire SENSOR H Master Power Switch MAINSW-S I Remote control REMO-H2016 Specifications: Heater: 6-element infrared quartz Heat settings: High / Low / ECO (maintains a constant 68°) Voltage: 120V, 60Hz Power consumption: 1000W / 1500W BTU rating: 5,100 (Max.