Installation Guide

9
IVC US Residential Installation Guide –
Sheet Vinyl Flooring
IVC US Residential Installation Guide - Sheet Vinyl Flooring
There are three methods of installation suitable for IVC US Residential sheet vinyl flooring:
The installation method used is dependent upon the day-to-day activities and the overall floor dimensions.
1.
Releasable Full Spread Installation Method using Pressure Sensitive Adhesive (most common)
2.
Loose-Lay Installation (in areas 25 square yards or less and no more than 1 seam)
3.
Permanent Full Spread Installation Method (must be used for “special needs” installations, all new construction and
cold crack warranty jobs) PLEASE NOTE that if you elect to permanently install your IVC residential flooring using this
method as opposed to the Releasable Installation Method with Pressure Sensitive Adhesive that labor rates exceeding
residential releasable removal and underlayment will not be covered.
Please contact IVC US Technical Services at
888-225-8287 with any questions.
Releasable Full Spread Installation Method using Pressure Sensitive
Adhesive
Materials Required for Installation:
3/8” short nap paint roller
IVC FLEX-TECH Pressure Sensitive Releasable Adhesive
-
If unavailable, approved secondary alternatives include:
Taylor 2037
Henry
©
650 R
NOTE: IVC will not be held responsible for problems that may arise for approved secondary alternative
adhesives. Please contact the approved secondary alternative adhesives’ manufacturer with issues.
IVC FLEX-SEAM Premium Seam Bond
-
If unavailable, approved secondary alternatives include:
Taylor 2062
NOTE: IVC will not be held responsible for problems that may arise for approved secondary alternative
seam sealers. Please contact the approved secondary alternative seam sealer’s manufacturer with issues.
Acrylic Double Face Tape for Vinyl Floors
Sharp Utility Knife
Straight edge
Push broom
IVC FLEX -PRIM Acrylic Latex Primer (if priming the floor is necessary)
For acceptable underlayments, see next page
This document is reviewed on an ongoing basis.
MKF_0036_1 4/8/16