Specification

TABLE OF CONTENTS

1. SLIP RESISTANCE

2. WATER ABSORPTION

3. FROST RESISTANCE

4. SCRATCH HARDNESS

5. COLORATION

6. WEAR RATING

1. SLIP RESISTANCE

Slip resistance denes the slip resistance of a ceramic

or natural tile as determined by the American Society of

Testing Materials. Dynamic coefcient of friction (DCOF) is

dened by a numerical range between zero and one. To

meet the ADA guidelines, a tile must have a DCOF of .42 or

greater. A Lower DCOF means a tile has less traction and is

more slippery. A higher DCOF means a tile has more

traction and is less slippery.

SPECIFICATIONS

GUIDE

PAGE 1
SPECIFICATIONS GUIDE TABLE OF CONTENTS 1. SLIP RESISTANCE 2. WATER ABSORPTION 1. SLIP RESISTANCE 3. FROST RESISTANCE Slip resistance defines the slip resistance of a ceramic 4. SCRATCH HARDNESS or natural tile as determined by the American Society of 5. COLORATION 6. WEAR RATING Testing Materials. Dynamic coefficient of friction (DCOF) is defined by a numerical range between zero and one. To meet the ADA guidelines, a tile must have a DCOF of .42 or greater.
PAGE 2
. WATER ABSORPTION The chart below shows the various levels of water absorption. Impervious Tiles have the lowest absorption, 0.5% or less. These are suitable for all applications. Vitreous Tiles have a low absorption, 0.5- 3%. These are suitable for wet areas and outdoor applications. Semi-Vitreous Tiles are moderately absorbent, 3-7%. These can be used in most indoor areas. Non-Vitreous The most absorbent tiles, exhibiting more than 7.0%.
PAGE 3
5. COLORATION Tile coloration can vary slightly based on the manufacturing process and the material. Tiles can range from absolute consistency to a more random appearance. Here’s an overview of color and shading of individual tile selections. LOW (V1) Tiles display uniform color within each tile and from tile to tile. MEDIUM (V2) Slight variation in texture or pattern within a certain color. HIGH (V3) Moderate variation from tile to tile, and within each tile.