User's Manual

12
3. Basic Features
Placing a CO Call
1. Lift the portable station from the charger and press
[Send].
The [Send] key flashes green.
2. Press a line key.
Wait for the dial tone. The line key flashes green.
3. Dial the phone number.
You will hear a ring back tone in a moment.
4. Talk on the portable station when the call is answered.
Elapsed time of the call is displayed on the bottom line.
5. When you finish talking, press [End] and place the
portable station back into the charger.
NOTES:
• You can also access a line by dialing the Line Access number or the Line Group Access number,
instead of pressing a line key.
• If the System Quick-Mode Operation is programmed in the system database, you can access a CO line
just by pressing a line key.
• If Prime Line to Optimized is programmed in the system database, you can access a CO line just by
pressing [Send].
• If the phone number exceeds 12 digits, the display will show only the last 12 digits you have dialed. The
leftmost digit will blink to tell you the number you have entered is more than 12 digits.
Send
Clear
Hist
Power
End
1 2 3 4
5 6 7 8
ICM
OPTIMIZED
CO# 1 GP.1
2 0 1 5 5 5 8 5 8 0
CO# 1 GP.1
0 :0 5