User's Manual

Receiving a CO Call

When a line receives a CO call, the corresponding line key on your portable station flashes red. If the

portable station is specified in database programming to ring for incoming calls on that particular line, the

Indicator lamp will flash and a ringer will go off.

1. A line key flashes red.

If the portable station is programmed to ring for

incoming calls on that particular line, the Indicator

lamp will flash and a ringer will go off.

2. Lift the portable station from the charger and

press the flashing line key.

The line key turns green and intermittently blinks.

3. Press [Send].

4. Talk on the portable station.

5. When you finish talking, press [End] and place

the portable station back into the charger.

NOTES:

• If the portable station is specified in database programming to ring for incoming calls received on a

particular line, you can also answer incoming calls just by pressing [Send] (without pressing the line

key).

• When the Any Key Answer feature (Menu 54) is ON, you can answer incoming calls by pressing any

dial pad key. The portable station needs to be specified in database programming to ring for that line.

• If the portable station is specified in database programming to ring for incoming calls on a particular line,

it can display the phone number of a caller who has called in that line.

• When the PS Quick mode (Menu 52) is ON and the portable station is in the charger, you can answer

incoming calls by lifting the portable station from the charger.

• If you press [End] while the portable station is ringing (or vibrating), you can stop the ringing (or

vibrating) for that incoming call.

1 2 3 4

5 6 7 8

1 2 3 4

5 6 7 8

0 :0 1

# 1