User's Manual

31
5. Press [Menu].
The display shows the Group Selection menu.
6. Press [ ] or [ ] to bring up the desired group.
You can also use the dial pad (0–9) to select a group.
7. Press [Menu].
The display prompts you to confirm the selection.
8. Press [ ] or [ ] to select ENTRY or EDIT, and then
press [Menu].
You will hear two quick beeps when the entry has been
successfully made.
Selecting EDIT will take you back to Step 2. Press [End] if
you have no more entries to make.
NOTES:
• To place a CO call, you may have to add a digit for accessing a CO line and a pause before the phone
number.
• If you have incorrectly entered a digit, press [Clear] to delete it. The cursor will move back by one digit
every time you press [Clear]. Press and hold [Clear] for more than one second to delete the whole line.
• Pressing [Clear] when the middle line shows no digits takes you back to the previous menu screen.
• You can insert a pause when you register a phone number.
1. Press [Feat], [Menu], and a digit (1–9) to register a pause time in seconds.
2. You can register more than one pause.
3. One pause is counted as two digits.
• You can also register a remote access code.
1. Press [Feat], [Menu], and the digit 0, followed by a remote access code.
2. Once you dial the main number, using the Directory, and become connected to a service, press
[Send] to dial out the remote access code.
• You can register a group name to a Directory group.
• If you try to make an entry when 500 entries are already registered, you will hear a warning tone and
the portable station displays, ENTRY FAILED: MEMORY FULL. The portable station will go back to the
idle state in two seconds.
SELECT GROUP
Gro up 0
ENTRY SAVED
4 9 9 FREE
REGISTER?
 ENTRY
EDIT