User's Manual

48
3. Press [ ] or [ ] to select a Speed Dial key/key
combination. Then press [Menu].
If you select EAR-MIC, you can register a phone number to
the switch on the earpiece microphone.
4. Enter the name you wish to register.
5. Press [Menu].
6. Enter the phone number you wish to register.
The entered digits will show up from bottom-right.
7. Press [Menu].
You will hear a confirmation tone to indicate that the
registration has been successfully made. The portable
station will go back to the idle state.
NOTES:
• You can register pauses and [Send] to a Speed Dial key/key combination.
• You need to register [Send] following the phone number in order to dial by just pressing a Speed Dial
key/key combination.
• Press [Feat], [Menu], and a digit (1–9) to register a pause time in seconds.
• One pause is one to nine seconds long. If you need longer pause duration, program two or more
consecutive pauses.
• You can also register a remote access code.
1. Press [Feat], [Menu], and the digit 0, followed by a remote access code.
2. Once you dial the main number (using the Directory) and become connected to a service, press
[Send] to dial out the remote access code.
ENTER NAME
P
ENTER NUMBER
2 0 1 5 5 5 8 5 8 0
EAR– MIC
SAVED