User manual

CAN-CR2xx - Manual, V2.0

Configuration

3 Configuration

To operate the CAN-Repeater, no software installation is required.

Before you can use the CAN-Repeater the internal DIP switches S301, S302,

CAN1, CAN2 and CAN3 has to be set according to the CAN network configura-

tion.

In Picture 3-1 the positions of the DIP switches of the CAN-CR200 are shown.

The DIP-switches of CAN-CR210/FO and CAN-CR220 are nearly at the same posi-

tion.

Picture 3-1 Position of the DIP switches

CAN1

CAN3

CAN-CR200

CAN-CR210/FO

S302

S301

CAN2

CAN-CR200

CAN-CR220