User manual

CAN-CR2xx - Manual, V2.0

Installation

4.2 Mounting with DIN rail bus support

CAN-CR200 and CAN-CR210/FO support a DIN rail bus extension possibility.

This feature gives you an easy possibility creating a star topology.

ATTENTION: The usage of the DIN rail bus is specific for IXXAT devices. If

another DIN rail bus is used, this one must not be connect-

ed to the IXXAT DIN rail bus.

If this is not considered, damages at the connected devices

could happen!

Prior to the connection of a device to the DIN rail, the TBUS plug has to be

mounted on the DIN rail. The orientation of the plug has to adapted to the de-

sired device installation position

Picture 4-2 TBUS plug and DIN rail

If the guide bar is like in Picture 4-2 below the power connector of the CAN-

Repeater is above.

Guide bar

Pin 1