Manualshelf

User manual

ManualsBrandsIXXAT ManualsRemote MaintenanceCAN bus CAN Bus, FO 12 Vdc, 24 Vdc
11121314151617181920
Copyright IXXAT Automation GmbH
CAN-CR2xx - Manual, V2.0
Installation
16
The interconnection of two TBUS plugs can be achieved by mounting the plugs
and afterwards were moved together, as shown in Picture 4-3.
Picture 4-3 Mounting of TBUS plugs
Now the CAN-Repeater CAN-CR200 and/or CAN-CR210/FO can be mounted.
The package of the CAN-CR200 and CAN-CR210/FO has an opening for the TBUS
plug in the area of the DIN rail, see Picture 4-4 . While the devices are attached to
the DIN rail, a correct mounting to the TBUS plug has to be observed. The guide
bar of the plug has to mate into the slot in the package.
Picture 4-4 Opening for TBUS plug
Prior to mounting the device it has to be assured, that the device is not
connected to power.
Opening for
TBUS plug
Guide bar
slot