User manual

CAN-CR2xx - Manual, V2.0

Appendix

7 Appendix

7.1 Technical specifications

Power supply: +9 V ... +32 V DC

Power consumption at 24 V: typical maximum

CAN-CR200 41 mA 100 mA

CAN-CR220 41 mA 100 mA

CAN-CR210/FO 62 mA 100 mA

CAN Transceiver: Texas Instruments SN65HVD251

Max. number of CAN bus nodes: 120

CAN bus termination resistor: 120 Ohm switchable via DIP switch

CAN propagation delay (typical):

CAN-CR200 210 ns

CAN-CR220 175 ns

CAN-CR210/FO 120 ns

CAN baudrates: 5 kBaud – 888 kBaud

Housing material: Polyamid

Dimensions (L x B x H) in mm: 114.5 x 99 x 22.5

Weight: ca. 300 g

Protection class: IP30

Operating temperature range: -20 °C - +70 °C

Storage temperature range: -40 °C - +85 °C

Relative humidity: 10 - 95 %, non-condensing

Galvanic isolation:

Product order number galvanic isolation

CAN-CR200 1.01.0067.44010 500 V AC / 1 min.

CAN-CR220 1.01.0067.44400

1.01.0067.44300

4 kV DC / 1 sec, 2.50 kV AC / 1 min

3 kV AC / 3 min, 3.75 kV AC / 1 min

CAN-CR210/FO 1.01.0068.4x010 500 V AC / 1 min

EMC-test according to: DIN EN 55022:1998 + A1:2000 + A2:2003

(Limit class A)

FCC Rules 47 CFR Part 15 – Subpart B

Alternative IEC/CISPR22:1997 + A1:2000

+ A2:2002 (Limit class A)

Environmental directive: RoHS, WEEE, Directive (2002/95/EC)