Manual
Table Of Contents
Installation 9 (26)
5 Installation
5.1 Installing the Software
For the operation of the interface a driver is needed.
Windows
► Install the VCI driver (see Installation Guide VCI Driver).
Linux and Real-Time Operating Systems
► Observe information about supported operating systems and interfaces on www.ixxat.com.
5.2 Installing the Hardware
Risk of ESD damages caused by improper handling!
Use ESD protective measures to avoid equipment damage.
► Make sure that the VCI driver is installed.
► Turn off the computer.
► Pull the power cord.
► Open the computer case according to the instructions of the computer manufacturer.
► Determine the corresponding slot.
► Plug PCI/PCIe connector in the corresponding slot, without using force.
► Make sure that the interface is securely held in the computer.
► Close the computer case.
→ Hardware installation is complete.
PC CAN Interface User Manual
4.01.0230.20000 3.2 en-US