Datasheet

ManualsBrandsIxys ManualsMOSFET RelaysMOSFET Relay OptoMOS LCA, DIP-6, 1NC, 350V, 120mA

www.clare.com

DS-LCB110-R07

LCB110

Single Pole OptoMOS

Relay

RoHS

2002/95/EC

Part # Description

LCB110 6-Pin DIP (50/Tube)

LCB110S 6-Pin Surface Mount (50/Tube)

LCB110STR 6-Pin Surface Mount (1000/Reel)

* For other packaging options consult factory.

Parameter Ratings Units

Blocking Voltage 350 V

Load Current 120 mA

Max On-resistance 35

Applications

Features

Description

Ordering Information

Pin Configuration

• Telecommunications

• Telecom Switching

• Tip/Ring Circuits

• Modem Switching (Laptop, Notebook, Pocket

Size)

• Hook Switch

• Dial Pulsing

• Ground Start

• Ringing Injection

• Instrumentation

• Multiplexers

• Data Acquisition

• Electronic Switching

• I/O Subsystems

• Meters (Watt-Hour, Water, Gas)

• Medical Equipment-Patient/Equipment Isolation

• Security

• Aerospace

• Industrial Controls

• Small 6-Pin Package

• Low Drive Power Requirements (TTL/CMOS

Compatible)

• Arc-Free With No Snubbing Circuits

• 3750V

rms

Input/Output Isolation

• FCC Compatible

• VDE Compatible

• No EMI/RFI Generation

• Machine Insertable, Wave Solderable

• Surface Mount Tape & Reel Version Available

The LCB110 is a 1-Form-B (normally closed) relay

which uses optically coupled MOSFET technology

to provide 3750V

rms

of input to output isolation. The

efficient MOSFET switches and photovoltaic die use

Clare’s patented OptoMOS

architecture. A highly

efficient GaAIAs infrared LED controls the optically

coupled output. The LCB110 has low on-resistance

and is well suited for most applications requiring a

normally closed relay.

Approvals

• UL Recognized Component: File # E76270

• CSA Certified Component: Certificate # 1175739

• EN/IEC 60950-1 Compliant

Switching Characteristics of

Normally Closed (Form B) Devices

+ Control

– Control

N/C

Load

Do Not Use

Load

AC/DC Configuration

+ Control

– Control

+ Load

– Load

DC Only Configuration

N/C

CONTROL

10%

90%

OFF

LOAD

Summary of content (6 pages)

PAGE 1
LCB110 Single Pole OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance Ratings 350 120 35 Description Units VP mA Ω The LCB110 is a 1-Form-B (normally closed) relay which uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. A highly efficient GaAIAs infrared LED controls the optically coupled output.
PAGE 2
LCB110 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation voltage Input to Output Operational Temperature Storage Temperature 1 1 Ratings 350 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device.
PAGE 3
LCB110 PERFORMANCE DATA* 35 25 Device Count (N) 25 20 15 10 5 1.17 25 1.19 1.21 1.23 15 10 5 1.25 15 10 5 22.7 23.0 23.3 23.6 23.9 24.2 370 375 380 385 390 395 On-Resistance (Ω) Blocking Voltage (VP) LCB110 Typical IF for Switch Operation (N=50, TA=25ºC, IL=120mADC) LCB110 Typical IF for Switch Dropout (N=50, TA=25ºC, IL=120mADC) LCB110 Typical Turn-On Time (N=50, TA=25ºC, IL=120mADC, IF=5mA) 25 20 15 10 5 25 20 15 10 0.50 0.55 0.60 0.65 0.70 0.
PAGE 4
LCB110 PERFORMANCE DATA* 0.30 0.7 1.6 0.25 0.6 1.4 I F =50mA 1.2 I F =10mA I F =5mA 1.0 0.20 0.15 0.10 0.05 0.8 -20 0 20 40 60 80 100 0.4 0.3 0.2 0 0 120 0.5 0.1 0 5 10 15 20 25 30 35 40 45 0 50 5 10 15 20 25 30 35 40 45 Temperature (ºC) LED Forward Current (mA) LED Forward Current (mA) LCB110 Typical On-Resistance vs. Temperature (IL=120mADC) LCB110 Typical On-Resistance vs. Temperature (IL=100mA) LCB110 Typical IF for Switch Dropout vs.
PAGE 5
LCB110 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 6-Pin DIP Thru-Hole Package 8.382 ± 0.381 (0.
PAGE 6
LCB110 MECHANICAL DIMENSIONS (Cont.) Tape and Reel Packaging for 6-Pin “S” Suffix Parts 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W = 16.00 MAX (0.63 MAX) B0 = 10.10 (0.400) Top Cover Tape K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.400) Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.