jjati crepe manual

USING YOUR APPLIANCE
Before using the appliance for the first time, peel off any promotional materials and packaging materials, and check that the
cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth. For best results, pour a teaspoon of
vegetable oil on to the non-stick plates. Spread over with an absorbent kitchen towel and wipe off any excess oil.
When your appliance is heated for the first time, it may emit slight smoke or odor. This is normal with many heating appliances.
This does not affect the safety of your appliance.
•
Place the unit on a level surface making sure it is not in contact with a wall, corner or curtains.
•
Never cut crepes on the baking plate. Use only wooden or heatproof plastic utensils to avoid scratching the nonstick coating.
•
Inset the pin plug into the power outlet, you will notice that the red power light and the green ready light will go on. Turn the
temperature knob to MAX and the green ready light goes off. Indicating the appliance is heating up.
•
Allow your appliance to pre-heat until the green ready light goes on. This indicates that the cooking plate have reached the
correct temperature for cooking.
•
For best results, lightly spray the cooking plate with a cooking oil spray before using. This will assist in the removal of the
crepes after cooking.
•
Once the green ready light is goes on pour crepe batter onto the baking plate spreading it with a circular movement using the
batter spreader.
•
The green ready light will continue to goes off and on during the cooking process indicating that the appliance is heating up
appropriately.
•
Allow the crepe to cook until the surface is no longer liquid and the crepe can be moved slightly.
•
Using a spatula, lift and flip the crepe completely.
•
Continue to cook on this side until the underside is browned slightly and easily lifted. Remove crepe to a wire rack and allow to
cooling slightly before stacking on a plate.
•
Adjust the temperature as needed after the first crepe is done.
•
Repeat as needed, stacking crepes layered between sheets of wax paper. Cover stack with foil and place in a 200
℉
oven to
keep warm.
CLEANING AND CARE
•
Always turn off the power and remove the plug after and before cleaning.
•
The cooking plate are coated with non-stick cooking surface, therefore little cleaning is required. Simply wipe cooking plate
over with a damp cloth.
•
Do not immerse the appliance in water or other liquid.
•
Do not use abrasive scouring pads, powders or cleaners.
•
Do not place in the dishwasher.
•
Before next use, lightly grease the cooking plate for easy removal of cooked crepes.
STORAGE
•
Always unplug the appliance before storage.
•
Always make sure the appliance is cool and dry before string.