User manual

11
display device.
7. Connect the USB 3.0 Display Adapter into an available USB port of a PC or
Notebook, After Inserting the USB 3.0 Display Adapter into an USB port, the
“Installing device driver software” message will pop up.
If the Driver software was installed successfully the following message should
appear:
If you’re not going to install another USB 3.0 Display Adapter, restart your PC. The
functions of the USB 3.0 Display Adapter will be activated after the computer restarted.
Multi USB 3.0 Display Adapter Installation
For installation of multiple USB 3.0 Display Adapters, during the “Install Shield Wizard
complete” step, select “No, I will restart my computer later.” and click Finish to
continue next step below
A. Connect all external display devices (monitor/ projector) to the HDMI /DVI
connector of USB 3.0 Display Adapters and switch power on.