Operation Manual

6
An example of an SMS reply with a GSM position:
[phone] Region: South East England, District: Greater London, Name: Kingston-upon-
Thames. Distance approx 5.4 km. E14*52‘1“@ N48*50‘24“, + -500m 11:35:01, 03.12.08
3) Remote blocking of the car (IMO)
The car is “immobilized” by blocking the immobilization circuit every time the car alarm is set. However,
if the keys are stolen, the car can also be blocked remotely. If you send the “IMO” command to the car
alarm phone number, you will receive a confi rmation SMS. The immobilization circuit will be blocked im-
mediately if the ignition key is off. If the ignition key is on when the car alarm receives the command, the
circuit will be blocked as soon as the ignition is switched off. This will be confi rmed to you by an SMS
message. The unblocking of the car alarm will only be possible via the “UNIMO” SMS command.
Ask the installer whether the IMO circuit has been installed in the car and what it blocks.
Remote access and service www.gsmlink.cz
Both the user and the installer can use the www.gsmlink.cz website to register the car alarm and commu-
nicate with it remotely. The access is secure and protected with a password. The website allows inspec-
tion and control of the car alarm and the changing of phone numbers and texts. The CA-1803 version also
allows the display of the current car position on a map. It is also possible to obtain an extract from the event
memory listing including time information, source, event type and car movement history
1)
.
If you need to change any car alarm settings, you do not usually have to go to your service company.
You just have to make a phone call and the installer can perform remote setting.
More detailed information about the GSMLink application is available at www.jablotron.cz.
1)
only with CA-1803
10
T2711 - Jablotron - Manuál Atho10 10T2711 - Jablotron - Manuál Atho10 10 8.4.2009 13:27:128.4.2009 13:27:12