Jabra Elite 45e User manual
© 2018 GN Audio A/S. All rights reserved. Jabra® is a trademark of GN Audio A/S. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio A/S is under license. MADE IN CHINA MODEL: OTE060 Declaration of Conformity can be found on www.jabra.
2.1 Included accessories 3. How to wear....................................6 ENGLISH Contents 1. Welcome..........................................4 2. Jabra Elite 45e overview..............5 3.1 Getting the correct fit 3.2 Attaching the EarWings and EarGels 3.3 Using the magnetic earbuds 4. How to charge............................. 10 4.1 Status LED 5. How to connect........................... 12 5.1 Headphones on/off 5.2 Pairing with a smartphone 6. How to use ..................................
Thank you for using the Jabra Elite 45e. We hope you will enjoy it! Jabra Elite 45e features ENGLISH 1.
ENGLISH 2. Jabra Elite 45e overview jabra jabra Magnetic zone USB port Microphones Volume up Status LED ja br a Mute/voice button Multi-function button Volume down 2.
Jabra Elite 45e is designed to be worn around the neck. ja bra ja bra For the optimal call experience, position the microphone as close to your mouth as possible. ENGLISH 3.
The headphones are supplied with three EarGel and EarWing sizes: large, medium and small. Small L Medium L Large L R ENGLISH 3.1 Getting the correct fit Small R R Medium Large It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel comfortable and secure in your ear.
1. To attach an EarWing, align the indent on the EarWing with the ridge on the earbud (as illustrated), and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached. 2. Firmly press the EarGel onto the earbud, ensuring it is angled correctly (as illustrated). ENGLISH 3.
ja bra The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Separating the earbuds will answer an incoming call. Go to section 6.1. for more information. ENGLISH 3.
To charge the headphones, connect a USB charging cable to the USB charging port. It is recommended to charge the headphones using the supplied Jabra charging cable, however it is possible to charge the headphones using your smartphone charger. ENGLISH 4. How to charge It takes approx. 2 hours to fully charge the headphones. Note: Always clean and dry the USB charging port before charging the headphones. It is recommended to recharge the headphones at least once a month.
ja br a ENGLISH 4.
5.1 Headphones on/off On: Hold the Multi-function button for 1 second. The status LED will flash green. ENGLISH 5. How to connect Off: Hold the Multi-function button for 3 seconds. The status LED will flash red.
ja bra 1. Ensure the headphones are powered off, and then hold (3 secs) the Multi-function button until the status LED flashes blue and you hear an announcement in the earbuds. ENGLISH 5.2 Pairing with a smartphone b a j ja bra ra 3 sec. 2. Wear the headphones and follow the voiceguided pairing instructions.
Magnetic zone jabra jabra ENGLISH 6. How to use USB port Microphones Volume up Status LED ja br a Mute/voice button Multi-function button Volume down 6.
Detach/attach the Magnetic earbuds Adjust volume Press the Volume up or Volume down button, when listening to music or on a call Skip track forward Hold (1 sec) the Volume up button (smartphone only) Skip track backwards Hold (1 sec) the Volume down button (smartphone only) Battery status Press the Volume up or Volume down button, when not listening to music or on a call Siri or Google Now Press the Mute/Voice button, when not on a call Mute/un-mute microphone Press the Mute/Voice button, when o
Headphone voice guidance are announcements intended to guide you or give headphone status updates (e.g. connection and battery status). How to turn voice guidance On/Off ENGLISH 6.2 Headphone voice guidance ja bra ja ja bra bra Voice Guidance Off: Ensure the headphones are powered on, and then hold the Mute/Voice button for 5 seconds. ja Voice Guidance On: Ensure the headphones are powered on, and then hold the Mute/Voice button for 5 seconds. bra Voice guidance is enabled by default.
Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your headphones. For more information on using Siri or Google Now, please refer to your smartphone’s user manual. ENGLISH 6.3 Siri or Google Now Phone voice commands Activate Siri or Google Now (phone dependent) Press the Mute/Voice button, when not on a call Voice assistant settings can be configured using the Jabra Sound+ app.
The headphones can answer or reject calls when you are already on a call. Multiple call handling End current call and answer incoming call Press the Multi-function button Put current call on hold and answer incoming call Hold (1 secs) the Multi-function button Switch between held call and active call Hold (1 secs) the Multi-function button Reject incoming call, when on a call Double-tap the Multi-function button Jabra Elite 45e ENGLISH 6.
Resetting the headphones clears the list of paired devices and all headphone settings. After resetting, it is necessary to re-pair the headphones to your smartphone. ENGLISH 6.5 How to reset Reset 5 Reset the pairing list Ensure the headphones are powered on and you are not on a call. Then simultaneously hold the Volume up button and the Multi-function button for 5 seconds. You will then need to re-pair the headphones. 6.
ENGLISH 7.
8.1 FAQ View the FAQs on Jabra.com/elite45e. ENGLISH 8. Support 8.2 How to care for your headphones • Always store the headphones with the power off and safely protected. • Avoid storage at extreme temperatures (above 50°C/122°F or below -10°C/14°F). This can shorten battery life and may affect the earbuds. • Regularly clean the mesh on each earbud to avoid them becoming blocked.
ENGLISH REV A jabra.