Specification Sheet
Auto On/O
Lens turns o 2
hours after last arc
Separate Buttons
for Grind, Torch and
Weld Modes
Navigate through
modes with the touch
of a gloved hand
Built-in magnification
lens holder
7 focal powers available
Three adjustable
settings for Shade,
Sensitivity and Delay
Easy selection with
a gloved hand
Battery Light
Indicator
Shows when
5 minutes remain
30% Larger Viewing Area
Enhances your vision
(As compared to Jackson Safety
NexGen* ADF)
Features:
• Variable Auto-Darkening Filter (ADF)
with Balder Technology delivers
true 1/1/1/1 optical rating
• Superior angle of view helps reduce
eye fatigue and the need to move
head, adjust and refocus
• Band pass with true color
recognition for enhanced clarity
of weld puddle
•
Four independent sensors
positioned to reduce possibility of
blockage during weld
• Variable shade from 5-8 and 9-13
• No retainer for easy helmet
installation and removal
• Meets ANSI Z87.1 2010 standards
and is CSA Z94.3 compliant
• DIN Plus Certified
TrueSight II Digital Variable Auto-Darkening Filter
Welding Helmet with Balder Technology
TrueSight* II Digital Variable ADF Welding Helmet with Balder* Technology
Code Description Units/Case
46159 HLX Welding Helmet with TrueSight II Digital ADF – Black 1
46160 HLX Welding Helmet with TrueSight II Digital ADF – Tattoo 1
46162 HLX Welding Helmet with TrueSight II Digital ADF – Serpent 1
46163 HLX Welding Helmet with TrueSight II Digital ADF – Arc Angel 1
46164 HLX Welding Helmet with TrueSight II Digital ADF – Ace of Spades 1
46111 HLX Welding Helmet with TrueSight II Digital ADF – Gold Wings 1
46118
HLX Welding Helmet with TrueSight II Digital ADF – Stars & Scars
1
46119
HLX Welding Helmet with TrueSight II Digital ADF – Flaming Butterfly
1
46120 HLX Welding Helmet with TrueSight II Digital ADF – Metal 1
46158 TrueSight II ADF Cartridge, 4.5 x 5.25 1
30320 TrueSight II External Safety Lens 10
30321 TrueSight II Internal Safety Lens 10
20696 370 Replacement Headgear 6
Jackson Safety Auto-Darkening Filter (ADF) Warning
• Provides limited eye protection. Additional protective devices are required for full eye coverage and protection.
• Should not be worn to protect from other hazards including, but not limited to, airborne dusts or mists, liquid splashes, impact hazards
and sports activities.
The selection and use of welding personal protective equipment must be based on a hazard assessment of the wearer’s work environment
conducted by the wearer, or for an industrial environment, an appropriately trained individual for your employer or organization in accordance
with OSHA regulations 29 CFR 1910.133 and ANSI Standard No. Z87.1. Make sure the ADF is installed properly into the helmet shell and
is clean. If the ADF is scratched or damaged, do not use it and replace it with a new one. Do not use the ADF without the Jackson Safety
*
brand internal and external safety plates. To clean, wipe only with a soft cloth. Do not immerse ADF in liquids.
See the dierence with Balder* Technology:
Hard Hat Interchange System
Let’s you easily, remove or switch
between welding helmet or face
shield without removing your hard hat
To learn more, please contact your SureWerx
Sales representative or visit www.Surewerx.com
Contact customer service:
1-800-323-7402
View with competitive ADF
View with Jackson Safety* ADF Helmet
with Balder* Technology
HARDHAT_INTERCHANGE_SYS_2.ai Colors:
Pantone 116 Yellow
Black
Arc Angel
Black Tattoo Serpent
Ace of Spades
Gold Wings Stars & Scars Flame Metal