Manualshelf

User Manual

ManualsBrandsJaclo ManualsWater equipmentThermostatic Valve, Rough - J-TH34
12345678910
j a c l o i n d u s t r i e s | 129 Dermody Street Cranford, NJ 07016
p 908.653.4433 | 800.852.3906 f 908.653.1717 | 800.852.4133 JACLO.COM
|
PG 6
CREATED 5.2014
(2) VALVE DISASSEMBLY & PREPARATION
THIS STEP IS REQUIRED TO FACILITATE VALVE FLUSHING AND ELIMINATE THE RISK
OF HEAT DAMAGE TO COMPONENTS WHILE SOLDERING
A.Cartridge removal (J-TH34, J-TH12, J-TH34-686, J-TH34-688, J-THVC12)
i. RemovePhillipsheadscrewandroughinshield.Donotdiscardscreworshield!
ii. Notepositionofthelimitstops(#6).Thisisthefactorysettingofmax.temperature.Next,remove
limitstops.Retainforreassembly.
iii.Remove"C"clip(#5).Retainforreassembly.
iv. Removelimitstopring(#4).Retainforreassembly.
v. Removethermostaticcartridgelocknut(#3)using1¼"wrench.Retainforreassembly.
vi. Removethermostaticcartridge(#2).Pulloutwardandtwistslightlytoaidremoval.Retainforreassembly.
B.Check stop removal (J-TH34, J-TH12, J-TH34-686, J-TH34-688, J-THVC12)
i. Removehotandcoldcheckstopnuts(#9)using
13
/
16
"wrench.Retainforreassembly.
ii.Removehot(8H)andcold(7c)checkstopassemblies.Pulloutwardandtwistslightlytoaidremoval.
Retainforreassembly.
C.Diverter cartridge removal (J-TH34-686, J-TH34-688, J-20682, J-20686, J-20688)
i. Removediverternutusing1"wrench.(#15-J-20686/J-20688)or3/4"wrench(J-20682)
ii.Removecartridge(#14aor#14b)(J-20682,J-20686,J-20688)
D.Volume control removal (J-THVC12 ONLY)
i. Removecartridgeusing17mmwrench
1
15
14 a
14 b
5
13
16
12
TRIM KIT
SUPPLIED SEPARATELY
(VARIES W/ MODEL #)
J-20682
J-20686 / J-20688
11
9
7
6
2
17
3
10
4
8