Use and Care Guide

*
PRESSURE WASHER WARNING:
Extra care should be taken when cleaning your siding and trim using a
pressure washer. To minimize the chance of damaging your siding and trim
use a wide fan tip, keep a minimum of 6 feet from the wall and keep the
pressure below 1500 psi.
Cleaning your siding and trim
Please follow these recommendations on caring for your James Hardie products. Damage to siding and trim
arising from improper cleaning or maintenance may not be covered by the James Hardie warranty.
Soft All Paint Brush
Chip Brush
Horsehair Brush
Siding Brush
Follow these recommendations to clean the exterior of your home and to help maintain the beauty and
value of your James Hardie siding.
• Wash down the exterior surfaces every 6 to 12 months with a garden hose to remove dirt and
debris, gently clean the siding with the soft brush or wet soft cloth in a side to side motion in
the direction of the plank siding.
NOTE: Clean by working small sections at a time, starting your way down to prevent dripping or streaking onto the
cleaned area.
• A low pressure water spray
*
and a soft medium bristle (nonmetal) brush is most suitable for
cleaning fiber cement products
NOTE: Acid and high pressure washing can damage the fiber cement surface and is not recommended
• Clean James Hardie ColorPlus
®
products by using water and a soft brush or cloth. For stubborn dirt
or stains, a mild detergent and a soft brush may be used
NOTE: For paint applied in the field, refer to the paint manufacturer for washing and maintenance requirements