Datasheet

7
UMG 605
▼
PQM - Power Quality Monitoring
High performance power analyser
for DIN rails
according to EN 50160
The UMG 605 power quality analyser is particularly suitable for monitoring power quality according
to standards such as the EN 50160. All power quality parameters are collected and analysed e.g. flicker,
short-term interruptions with fault recorder function, transients, harmonics up to 63rd and inrush
currents etc. Extensive communication possibilities e.g. RS 485 Modbus, Profibus, Ethernet (TCP/IP),
BACnet, http, FTP, SMTP, SNTP, DNS .... allow cost effective and rapid integration in existing com-
munication networks. Worldwide access to the embedded web server can be gained through a web
browser. The GridVis software included in the content of delivery allows extensive analysis just with
the click of a button.
Areas of application

Continuous monitoring of the power quality e.g. EN 50160

Ethernet gateway for subordinate measurement points

Analysis of electrical faults for network problems

Monitoring of the internal distribution network according to EN 61000-4-7, 4-15, 4-30

Report generator for EN 50160 analysis

Control tasks, e.g. depending on achieved measured values or limits

Transducer for building automation or PLC systems