Operation Manual

14
q
z
x
v
w
e
w r
NOTE:
The needle threader can be used with a #11 to #16
needle or a blue tipped needle. Thread sizes 50 to 90
are recommended.
Needle Threader
CAUTION:
Tu rn OFF the power switch when using the needle
threader.
t
c
z Lower the presser foot. Raise the needle to its highest
position. Pull down the needle threader knob q as far
as it will go. The hook comes out through the needle
eye from behind.
q Knob
x Draw the thread from guide (a) e to guide (b) r and
under the hook w. Draw the thread up along the right
side of guide (b) r and slip the thread in between
guide (b) and the holder plate t.
w Hook
e Guide (a)
r Guide (b)
t Holder plate
c Raise the knob in the direction of the arrow, drawing
the thread loop through the needle.
v Pull the thread through the needle eye.