Operation Manual

36
q
ew
Patchwork Piecing
q Stitch pattern: 18 and 21
w Thread tension dial: 3 to 6
e Presser foot: Zigzag foot A
Satin stitch foot F
w
z Place the patchwork pieces right sides together.
Select stitch pattern 18. Sew a precise 1/4˝ seam
allowance.
q Wrong side of fabric
w Right side of fabric
x Select stitch pattern 21.
Remove the zigzag foot A and attach the satin stitch
foot F.
c Press the seam allowance to open.
Sew stitch pattern 21 on the right side of the
garment centering over the seam line.
q
w
w
z
x c
q
ew
Applique
q Stitch pattern: 13
w Needle thread tension: 1 to 4
e Presser foot: Satin stitch foot F
• Adjusting the stitch width
Select pattern 13.
Press the cursor buttons to move the cursor under
the stitch width value “3.5” e (default setting).
Press the button to decrease the stitch width r.
Press the button to increase the stitch width t.
The stitch width will be varied base on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 13 (stitch width decreased)
t Stitch pattern 13 (stitch width increased)
y Center needle drop position
e
r
t
y
w
q
Place an applique on the fabric and baste or pin it in
place.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge