Operation Manual

12
Slide the stitch length control to set the setting mark at the
desired stitch length.
The higher the number, the longer the stitch
Setting mark
Pattern Selector Dial
Stitch Length Control
" " is the recommended setting for buttonhole stitching.
Adjust the stitch length control in the 0.5–4 range when
you sew the zigzag stitch.
Set the stitch length control at "S.S." to sew the stretch
stitch pattern.
If the stretch stitch pattern is uneven, slide the stitch length
control in the direction of "–" to compress it, or "+" to expand
it.
Stitch Width Control
Note : Raise the needle above the fabric, when you slide
the stitch width control.
1
1
1
S.S.
Raise the needle and presser foot. Turn the pattern
selector dial to set the setting mark at the symbol
corresponding to the desired pattern.
Setting mark
Slide the stitch width control to set the setting mark at
the desired stitch width.
The higher the number, the wider the stitch width
Setting mark
1
1
1
012345
When the stitch width is narrow, the right side of the pattern
is cut off.
(Example: Pattern E)
Width [5] Width [3]
(A)
(B)
(A) (B)
(A): Model 419S
(B): Model 423S