Operation Manual

25
Rolled Hem
Pattern selector: A
Presser foot: Hemmer foot
Thread tension: 2–6
Stitch length: 1.5–4
Stitch width: (5)
4
1
2
3
5
1 Make a double 0.25 cm (1/8") fold approximately
8 cm (3") in length.
0.25 cm (1/8")
8 cm (3")
2 Lower the needle into the fabric at the point where
sewing is to begin, then lower the hemmer foot.
Sew 3 or 4 stitches while pulling the needle and bobbin
threads.
3 Lower the needle into the fabric and lift the hemmer
foot. Insert the folded portion of the fabric into the curl
of the hemmer foot.
4 Lower the hemmer foot, then sew by lifting up the edge
of the fabric to keep it feeding into the curl smoothly
and evenly.
5 Trim about 0.7 cm (1/4") from corners as illustrated,
to reduce bulk.
0.7cm (1/4")
1
2
3
4
5
1
2
3
4
5
1
2
3
1
2
3
3