Operation Manual

30
Oiling the Machine
Note:Turn off the power switch when oiling the machine.
Oil the points as shown at least once a year.
Use good quality sewing machine oil.
One or two drops of oil is sufficient.
Wipe off excess oil, otherwise it may stain fabric.
If machine has not been used for an extended time, oil it
before sewing.
Oiling behind the face plate
Remove the cap,screw and face plate.
Oil the points indicated in the illustration.
Cap
Screw
Face plate
Oiling the shuttle hook area
Open the hook cover.
Oil the point indicated in the illustration.
Hook cover
1
2
3
4
1
2
3
4
Sewing Light
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing machine
by removing the setscrew.
* Unplug the power supply before changing the bulb.
* Do not dismantle the machine other than explained in this
manual.
(A) To remove ........ Turn to the left.
To replace ........ Turn to the right.
(B) To remove ........ Push and twist to the left.
To replace ........ Push and twist to the right.
(A)
(B)
Warning : The bulb could be HOT. Protect your fingers when
handling it.