Instruction Booklet

24
q
ew
Overcasting with Zigzag Stitch
q Stitch pattern: 07
w Needle thread tension: 3 to 7
e Presser foot: Overedge foot C
q
ew
Multiple Zigzag
q Stitch pattern: 08
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot A
This stitch is used to finish seams on synthetics and
other fabrics that tend to pucker. The stitch is also
excellent for darning and mending tears.
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the
stitches.
q
ew
Knit Stitch
q Stitch pattern: 09
w Needle thread tension: 3 to 6
e Presser foot: Zigzag foot A
Place your fabric to allow a 5/8˝ (1.5 cm) seam. Trim
excess close to stitching. Be careful not to cut the
stitches.
This zigzag variation is very useful in garment
construction and in finishing raw edges of any sewing
project.
The black ridge and the guide wires on the overedge
foot keep the edge neat and the fabric straight.
Place your fabric so that the double guide wires come
to the edge. The machine will stitch over these wires.
The black ridge will keep loose threads in so that
the needle can stitch over them.
As you sew, be sure your fabric edge pushes up against
the black ridge.
NOTE:
When using an overedge foot, make sure to set the
stitch width between 5.0 and 7.0, otherwise the needle
may hit the overedge foot.