Instruction Booklet

38
q
ew
Scallop Stitch
q Stitch pattern: 41
w Thread tension dial: 3 to 6
e Presser foot: Zigzag foot A
Sew the stitches approximately 3/8˝ (1 cm) inside the
edge of the fabric.
Tr im the outside of the stitches as shown. Make sure
you don’t cut the thread.
q
ew
Applique
q Stitch pattern: 17 or 18
w Needle thread tension: 1 to 4
e Presser foot: Satin stitch foot F
r Presser foot pressure dial: 3
* The stitch width of pattern 17 can be changed without
changing its center needle position.
* The stitch width of pattern 18 can be changed without
changing its left needle position.
Place an applique on the fabric and baste or pin it in
place.
Reduce the foot pressure.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
q Applique
w Outer edge
r
• Adjusting the stitch width
Select pattern 17.
Press the cursor buttons to move the cursor under
the stitch width value “3.5” e (default setting).
Press the button to decrease the stitch width r.
Press the button to increase the stitch width t.
The stitch width will be varied base on the centered
needle drop position y.
e Stitch width (3.5)
r Stitch pattern 17 (stitch width decreased)
t Stitch pattern 17 (stitch width increased)
y Center needle drop position
e
r
t
y
w
q