Operation Manual

Inserting the bobbin

z Place the bobbin in the bobbin holder with the thread

running off as illustrated.

q Thread

x Guide the thread into the front notch on the front side

of the bobbin holder. Draw the thread to the left,

sliding it between the tension spring blades.

w Front notch

e Tension spring blade

c Continue to draw the thread lightly until the thread

slips into the side notch.

r Side notch

v Pull out about 4” (10 cm) of thread. Attach the hook

cover plate. Check the threading by referring to the

chart shown on the hook cover plate.

t Thread

y Hook cover plate