Operation Manual

34
Adjusting stretch stitch balance
If the stretch stitch patterns are uneven when you sew
on a particular fabric, correct them by turning the stitch
length dial.
If the patterns are drawn out, correct them by setting the
dial to the “–” side.
If the patterns are compressed, correct them by setting
the dial to the “+” side.
“+”
“–”
Stitch Width Dial
Turn the stitch width dial to set the desired stitch width
number at the setting mark.
The higher the number, the wider the stitch
q Stitch width dial
w Setting mark
CAUTION:
Do not turn the stitch width dial while the needle is in the
fabric, otherwise the needle may bend or break.
Variable needle position
The needle drop position of the straight stitches can be
moved between the center (5) and left (0) with the stitch
width dial.
q
w