Operation Manual

44
Knit Stitch
Machine setting
q Stitch pattern: G
w Stitch width: 5
e Stitch length: S.S.
r Thread tension: A
t Presser foot: Overedge foot C
This stitch is ideal for finishing edges of stretch fabrics. It
seams and finishes the fabric edges simultaneously.
Place the edge of the fabric next to the guide of foot and
sew while guiding the fabric edge along the guide.
y Guide
CAUTION:
Do not set the stitch width less than 5 when using the
overedge foot C, otherwise the needle may hit the foot
causing the needle to bend or break.
Tricot Stitch (Multiple Zigzag Stitch)
Machine setting
q Stitch pattern: D
w Stitch width: 3 – 5
e Stitch length: 0.5 – 1.5
r Thread tension: A
t Presser foot: Zigzag foot A
This stitch is used to finish a raw edge on synthetics and
other fabrics that tend to pucker.
Place the fabric to leave a 5/8" (1.6 cm) allowance.
Trim the extra allowance after sewing.
It is also used for mending tears.
q
w
e
r
t
q
w
e
r
t
y