Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Yardage Chart Yards Quick Sewing Reference Guide janome.com janome.com Inches 1/8 4.5 1/4 9 1/3 12 3/8 13.5 1/2 18 5/8 22.5 2/3 24 3/4 27 7/8 31.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Standard Quilt Sizes Type Mattress Size Standard Linen Sizes Quilt Size Type (with approx.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) 1-Step Buttonhole Guide Quick Guide intended for Janome machines with 1-step buttonhole. Step 1: Slide back of sliding buttonhole foot back and insert button into space. Slide back closed until the button is secure within the space. Step 2: Attach buttonhole foot to machine. Step 3: Mark buttonhole placement on project.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Thread Thickness vs.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Fat Quarter Square Cuts How many squares in a yard? Quantity Quantity Square Size Square Size 572 1.5” 99 2” 320 2” 56 2.5” 224 2.5” 42 3” 143 3” 30 3.5” 110 3.5” 80 4” 20 4” 56 4.5”/5” 16 4.5” 42 5.5” 12 5” 30 6”/6.5” 12 5.5” 20 7.5” 9 6” 16 8.5” 6 6.5” 12 9.5” 9 10.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Fat Eighth Square Cuts Quantity janome.com Charm Square Cuts (5”) Square Size Fabric Size Quantity 198 1” 84 1.5” 1/4 Yard 8 44 2” 1 Fat Quarter 12 24 2.5” 1/2 Yard 24 21 3” 3/4 Yard 40 12 3.5” 1 Yard 56 10 4” 8 4.5” janome.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Sewing Machine Maintenance Guidelines Sewing Machine Parts Take-up Lever Bobbin Winder Tension Disc Before each Project: Check to make sure sewing foot and needle are fully attached/inserted and secure. Spool Pin Bobbin Winding Pin Hand Wheel Double check the correct foot is on the machine for your selected stitch.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Sewing Terms Sewing Terms Cont. BACK STITCH TOP STITCH A way to secure the beginning and ending of each stitched seam. This type of stitch is very similar to an edge stitch but will be sewn a You’ll backstitch 4-5 stitches when you start and stop. This will little farther away from a finished fabric edge.
Sewing Reference Cards Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring. (Laminate if you’d like extra durability.) Basic Sewing Tools Sewing Safety • Keep cutting tools like scissors and rotary cutters closed when not in use. • Make sure cords are out of the way so no one trips on them. MARKING PEN THREAD SNIPS THREAD SPOOLS • Turn off machine before unplugging. • Always watch where your hands and fingers are. Always keep them away from the sewing needle.