User Manual

Sewing Reference Cards
Directions: Print at full scale, cut on outside lines, hole punch, and attach to a keyring.
(Laminate if you’d like extra durability.)
Sewing Machine
Maintenance Guidelines
Sewing Machine Parts
janome.com janome.com
Before each Project: Check to make sure sewing foot
and needle are fully attached/inserted and secure.
Double check the correct foot is on the machine for your
selected stitch.
After each Project: Remove the needle plate, bobbin,
and bobbin case. Usethe small brush included with all
machines to clean out any lint from this area, then
reinsert bobbin case, bobbin, and reattach needle plate.
Every 8 hours of Sewing: Insert a new needle in the
machine.
Yearly: Take machine to visit your closest Janome dealer
or Authorized repair shop for annual maintenance.
Note: Always check your machine manaul for oil needs
beyond the annual maintenance. Many of our machines
are self-oiling and don’t require extra beyond what the
technician will refill each year.
Note: Your machine may have these in slightly dierent
locations, or some features may not be included on your
machine. Use the manual included with your machine if
you’re having trouble locating a specific button/feature.
Speed
Regulator
Ten sion
control
Take- up
Lever
Bobbin Winder
Ten sion Disc
Spool Pin
Hand
Wheel
Stitch
Chart
Power
Switch
Reverse
Stitch
Stitch selector,
length, width
adjustment
Needle
Presser
Foot
Feed
Dogs
Needle
Plate
Needle
Up/Down
Presser
Foot
Lift
Bobbin
Winding Pin