Installation Instruction of B2121D 1
1 top panel=1 front panel=1 bottom panel=1 6 5 left middle panel=1 7 left glass sliding door=1 right middle panel=1 8 11 hardware feet rack=1 right glass sliding door=1 2 flipping door=1 12 back panel=1 14 13 left side panel=1 trim=1 middle panel=1 10 9 4 3 right side panel=1
HARDWARE LIST A A cam lock(45pcs) D B E H G F wire cover=3 3.5*18 self-tapping screw=6 I 4*10 handle screw=2 single hole handle=2 8*30wood dowel=16 rod(45 pcs) rubber rail=1 set C J meson=2 3.
12 E B 11 A A 3 4 Assemble③front panel、 ⑪back panel、④ ⑫side panel ： 1.Use eight pcs(A)cam locks,eight pcs(A)rods,eight pcs(B)wood dowels to connect ③front panel、 ⑪back panel、④left side panel and ⑫right side panel. Noted:the lock cookie hole of ③front panel、 ⑪back panel facing back. Then cover(E)wire cover to ⑪back panel after the installation. B A A 2 Assemble ②bottom panel and (step 1) ： 1.Use 12 pcs(A)cam locks,12 pcs(A)rods,four pcs(B)8*30 wood dowels to connect.
13 D F 5 J 6 K 7 A A Assemble ⑤left middle panel,⑥middle panel， ⑬right middle panel and ⑦trim： 1.Firstly,use 6 pcs(F)3.5*18 self-tapping screws to fix(D)rubber rail on the inside of ⑤left middle panel, ⑬right middle panel respectively. 2.Then install two pcs(K)laminate supports on the inside of ⑤left middle panel and ⑬right middle panel. 3.Use four pcs(J)6*30 flatbread screws to connect⑤left middle panel,⑥middle panel and ⑬right middle panel. 4.
H C 14 I D 8 9 Assemble glass sliding door and handle ： 1.Use two pcs(I)mesons,two pcs(H)4*10 handle screws to install(C)single hole handle as picture shown on ⑨left glass sliding door and ⑭right glass sliding door. 2.Use two pcs(G)3.5*14 self-tapping screws to fix(D)rubber rails(half) on ⑧flipping door. G detail zoom 1.Put left and right glass sliding door、flipping door into slot of bottom panel in turn. Noted:Glass sliding doors are placed in the outer slot.
1 A A B Assemble ①top panel and cabinet: 1.Use 24 pcs(A)cam locks,24pcs(B)rods, 8 pcs(C)8*30 wood dowels to install ①top panel. G 1.Use six pcs(G)3.5*14 self-tapping screws to fix ⑩hardware feet rack under ②bottom panel.
