Instructions / Assembly

Assembly Instructions
2. Attach the wood legs (3 & 4) to the corners of
the seat cushion (1) as shown.
1.Remove all parts from the
carton and place them on a
protected surface or carpet.
Take out the wood legs (3 & 4)
out of the seat box.
3. Attach the back cushion (2) to the seat cushion (1)
by sliding the receivers into the mechanism posts
located on the seat cushion (1). From the front of the
recliner, press down on both sides of the back
cushion (2) to firmly secure. The back cushion (2)
and seat cushion (1) will automatically lock into
place. Then pull the back flap down tightly and attach
the back flap to the bottom of the seat cushion (1).