Instructions / Assembly
STEP 3STEP 2
3. Attach the back cushion (A) to the seat cushion (B) by
sliding the receivers into the mechanism posts located on the
seat cushion (B). From the back of the recliner, press down
on both sides of the back cushion (A) to firmly secure,make
sure the back(A) is inserted horizontally into the seat
cushion(B). The back cushion (A) and seat cushion (B) will
automatically lock into place. Then pull the back flap down
tightly and attach the back flap to the bottom of the seat
cushion (B).
A
B
2.Screw leg (D) into the corresponding hole of seat
cushion(B) by hand,and then aline the bolt of leg with
the hole of seat cushion,use screw① 、spring washer
③and plat washer② to attach them as picture show,
tighten screw① with allen key④,the installation
method of leg(C) is the same as the leg(D).