Manual

13 of 24

FIGURE 5 - SECTION B-B

INSTALL THE FIRST SEGMENT OF DRIVE PIPE

1. Insert the Swaged end of one section of drive pipe into the winch drum and push

towards the first DCP-A.

 Pipe may be inserted opposite direction if clearance is an issue.

2. Continue to insert the drive pipe segment through the DPC-A and continue the edge

of the pipe to end 27-3/4” beyond the center of the DPC-A.

3. Temporarily secure the drive pipe section to the winch with Duct Tape to prevent it

moving unexpectedly.