Manual

9of 24

FIGURE 1- MOTOR REFERENCE POINT

INSTALL MOTOR ATTACHMENT STRUT AND MOTOR ASSEMBLY.

1. 2 pieces of Unistrut that is 11” c/c are attached to the beam with unistrut clamps at a

location of the first piece a minimum of 14” outside the frame perimeter away from

the motor reference point.

2. Loosely assemble the motor assembly and hoist it into position.

3. Attach the motor assembly to the motor strut and establish the drive pipe centerline

Above Finished Floor, (AFF).

4. Secure all nuts to mount the motor to the strut.

5. DO NOT INSTALL the winch drive bolts to the winch at this time.