Brochure

ASB6125
High Power
Dual 15" Subwoofer
Key Features:
䉴 2 x 2265H-1 15" Differential Drive
®
dual
voice coil dual gap, neodymium
magnet transducers
䉴 1600 watts continuous pink noise,
6400 watts peak power handling
capacity
䉴 Parallel/Discrete switchable input
mode
䉴 Large vent area for high output with
low distortion
䉴 For ground-stacked or suspended
applications in stand-alone arrays or in
combination with other AE Series
products
Applications:
䉴 Performing Arts Facilities
䉴 Theatrical Sound Design
䉴 Auditoriums
䉴 Worship Facilities
䉴 Live Clubs
䉴 Dance Clubs
䉴 Sports Facilities
䉴 Themed Entertainment Venues
The ASB6125 is a high power,
lightweight front-loaded vented
subwoofer enclosure housing two JBL
2265H-1 Differential Drive
®
dual voice
coil dual gap 15" woofers. These
woofers feature neodymium magnets
and ultra robust cones for extra long
life.
The enclosure is constructed of
multiply hardwood coated in JBL’s
rugged DuraFlex™ finish and is heavily
braced to maximize low-frequency
performance. The rectangular enclosure
is fitted with sixteen M10 threaded
attachment points and utilizes a
14-gauge steel grille internally lined
with acoustically transparent foam to
provide additional driver protection and
give a very professional appearance.
The ASB6125 is part of JBL’s AE
Series, a versatile family of
loudspeakers intended for a wide
variety of applications.
Specifications:
System:
Frequency Range (-10 dB): 32 Hz - 1 kHz
Frequency Response (± 3 dB): 38 Hz - 1 kHz
Input Modes: Drivers Parallel / Drivers Discrete
Transducer Power Rating
1
: 1600 W (6400 W peak), 2 hrs
Long-Term System Power Rating
2
: 1350 W (5400 W peak), 100 hrs.
Maximum SPL (1m)
3
: 35 Hz - 400 Hz: 132 dB-SPL cont av (138 dB peak)
System Sensitivity
4
: 35 Hz - 400 Hz: 100 dB-SPL, 1W (2.0V) @ 1m
Nominal Impedance: 4 ohms in parallel-drive mode
2 x 8 ohms in discrete-drive mode
Transducers:
Low Frequency Driver: 2 x 2265H-1, 380 mm (15 in) dia., 75 mm (3 in) Dual Coil Dual
Gap neodymium Differential Drive
®
drivers
Physical:
Enclosure: Rectangular cabinet, 16 mm (5/8 in) exterior grade 11-ply birch
plywood
Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side), M10 threaded hardware
Finish: Black DuraFlex™ finish. White available upon request.
Grille: Powder coated 14 gauge perforated steel, with acoustically
transparent black foam backing.
Input Connector: NL4 Neutrik Speakon
®
and CE-compliant covered barrier strip
terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)
wire or max width 9 mm (.375 in) spade lugs. Speakon in
parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
Dimensions (H x W x D in 965 x 419 x 597 mm
vertical cabinet orientation): (38.0 x 16.5 x 23.5 in)
Net Weight: 36.7 kg (81.0 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers
1
AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating
plus long-term 100 hr rating are specified for low-frequency transducers.
2
AES standard, one decade pink noise with 6 dB crest factor, in cabinet, long-term 100 hr rating.
3
Calculated based on power rating and sensitivity, exclusive of power compression.
4
Half-space (2␲) loading, averaged in specified frequency band.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Professional Series
76708_JBL_ASB6125.qxd 6/3/09 11:07 AM Page 1