Quick Start Guide

QUICKSTART GUIDE

2. PLUG IN THE INPUTS

1. Turn the Master Volume Control (J) all the

way to the left before connecting any inputs.

2. Connect your devices to the Input Jacks (E).

1. POWER ON THE UNIT

1. Connect the power cord to the

Power Receptacle (L).

2. Press the Power Standby [H] switch for

.5 of a second to engage power.

POWER

Bluetooth

Power Standby

Automatic Feedback

Supression

Music Ducking

EQ Preset

LED Indicators

XLR-1/4”

Combo Inputs

XLR Male Loop Thru

CH1 & CH2 Gain

Bass Boost

EQ Preset

Selection

Button

Master Volume

POWER

Power Receptacle

POWERED SPEAKER WITH BLUETOOTH

PAGE 1
POWERED SPEAKER WITH BLUETOOTH QUICKSTART GUIDE 1. POWER ON THE UNIT 2. PLUG IN THE INPUTS 1. Connect the power cord to the Power Receptacle (L). 1. Turn the Master Volume Control (J) all the way to the left before connecting any inputs. 2. Press the Power Standby [H] switch for .5 of a second to engage power. 2. Connect your devices to the Input Jacks (E).
PAGE 2
4. SET UP THE CHANNELS 5. PAIR 1. Select a Preset using the EQ Preset Selection Button (B). This device supports Bluetooth audio streaming. 2. Determine the CH1 & CH2 Gain (D] source. For microphone set to 3 o’clock. For line source set to 9 o’clock. To connect your device: 3. Slowly turn the Master Volume (J) to the right until the desired volume is reached. AUDIO 1. Turn on Bluetooth on your source device. 2. Hold the Bluetooth (I) button for 2 seconds.