User Manual

10
EON ONE
System
System Type: Portable Line Array with powered mixer
Maximum SPL Output: 118 dB peak system output (pink noise)
Frequency Range (-10dB): 37�5Hz – 18�5kHz
Frequency Response (-3dB): 45Hz – 18kHz
AC input : 100 - 120 VAC, 220-240 VAC 50/60 Hz
Amplier
Design: Class D
System Power Rating: 250 Watts LF, 130 Watts HF
Mixer
Input Connectors: 6 inputs (2 Mono Mic/Line, 2 x Stereo)
Channels:
1-2 are XLR / 1/4" jack combo connectors
(XLR is a mic level input, 1/4" is a line level input)
3-4, one pair of 1/4" balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
5-6 is a 3�5 mm stereo jack
Input Impedance: Ch 1-2 Combo: XLR 40 K Ohms Balanced
Ch 1-2 Combo: TRS 40 K Ohms Balanced
Ch 3-4: TRS 20 K Ohms Balanced
Ch 3-4: RCA 5 K Ohms Unbalanced
Ch 5-6: 3�5 mm 10 K Ohms Unbalanced
Output Connectors: Monitor outputs: one pair of RCA jacks (stereo)
Signal Indicators: Limit: Yellow LED indicates limiter active condition
EQ: Individual channel Bass and Treble controls, center detent, +/-12 dB cut and boost
System Limiter: On Board DSP Limiting and Tuning
Speaker
LF Driver: 1 x 254mm (10 in) woofer
HF Driver: 6 x 2" drivers
Coverage Pattern: 100º x 50º nominal
Enclosure: Polypropylene
Grille: Powder coated perforated steel
Dimensions (H x W x D)
Unit Dimensions:
Packaged Dimensions:
23.3" x 14.5" x 17" (593mm x 369mm x 434mm)
30.9" x 15.6" x 22.5" (769mm x 397mm x 572mm)
Net Weight of System: 18.51 kg (40.8 lbs)
Section 5: System Specications